Deprecation Note

We published the last version of Graylog Documentation before the release of Graylog 4.2. Now, all documentation and help content for Graylog products are available at https://docs.graylog.org/.

There will be no further updates to these pages as of October 2021.

Do you have questions about our documentation? You may place comments or start discussions about documentation here: https://community.graylog.org/c/documentation-campfire/30

Setup

Graylog Audit Log is a commercial feature that can be installed in addition to the Graylog open source server.

Installation

Audit Log functionality is part of the Graylog Enterprise plugin, please check the Graylog Enterprise setup page for details on how to install it.

Configuration

Graylog Audit Log provides two ways of writing audit log entries:

  1. Database

  2. Log file via log4j2 appender

Logging to the database is always enabled and cannot be disabled.

Note

All configuration needs to be done in the Graylog server configuration file and in the logging configuration. (only if the log4j2 appender is enabled) Check the default file locations page for details.

The web interface can show the current configuration.

../../_images/auditlog-setup-config.png

Database Configuration Options

The default MongoDB audit log has a few configuration options available.

Configuration Options

Name

Description

auditlog_mongodb_keep_entries

delete audit log entries older that configured interval

auditlog_mongodb_cleanup_interval

interval of the audit log entry cleanup job

auditlog_mongodb_collection

the MongoDB collection to store the audit log entries in

auditlog_mongodb_keep_entries

This configures the interval after which old audit log entries in the MongoDB database will be deleted. You have to use values like 90d (90 days) to configure the interval.

Warning

Make sure to configure this to fit your needs. Deleted audit log entries are gone forever!

The default value for this is 365d.

Example:

auditlog_mongodb_keep_entries = 365d

auditlog_mongodb_cleanup_interval

This configures the interval of the background job that periodically deletes old audit log entries from the MongoDB database. You have to use values like 1h (1 hour) to configure the interval.

The default value for this is 1h.

Example:

auditlog_mongodb_cleanup_interval = 1h

auditlog_mongodb_collection

This configures the name of the MongoDB collection where audit log entries will be stored.

The default value for this is audit_log.

Example:

auditlog_mongodb_collection = audit_log

Log4j2 Configuration Options

The optional log4j2 audit log appender has a few configuration options available.

Note

To configure the log4j2 appender you have to edit the Graylog server configuration file and the log4j2.xml file for your setup!

Configuration Options

Name

Description

auditlog_log4j_enabled

whether the log4j2 appender is enabled or not

auditlog_log4j_logger_name

log4j2 logger name

auditlog_log4j_marker_name

log4j2 marker name

auditlog_log4j_enabled

The log4j2 audit log appender is disabled by default and can be enabled by setting this option to true.

The default value for this is false.

Example:

auditlog_log4j_enabled = true

auditlog_log4j_logger_name

This configures the log4j2 logger name of the audit log.

The default value for this is gl-org.graylog.plugins.auditlog.

Example:

auditlog_log4j_logger_name = graylog-auditlog

auditlog_log4j_marker_name

This configures the log4j2 marker name for the audit log.

The default value for this is AUDIT_LOG.

Example:

auditlog_log4j_marker_name = AUDIT_LOG

Log4j2 Appender Configuration

To write audit log entries into a file you have to enable the log4j2 appender in your Graylog configuration file and add some configuration to the log4j2.xml file that is used by your server process.

The log4j2.xml file location is dependent on your deployment method. so please check the default file locations page.

An existing log4j2.xml config file needs another <Logger/> statement in the <Loggers/> section and an additional appender in the <Appenders/> section of the file.

Warning

The file on your system might look different than the following example. Make sure to only add the audit log related snippets to your config and do not remove anything else!

Example log4j2.xml file with audit log enabled:

<?xml version="1.0" encoding="UTF-8"?>
<Configuration packages="org.graylog2.log4j" shutdownHook="disable">
    <Appenders>
        <!-- Graylog server log file appender -->
        <RollingFile name="rolling-file" fileName="/var/log/graylog-server/server.log" filePattern="/var/log/graylog-server/server.log.%i.gz">
            <PatternLayout pattern="%d{yyyy-MM-dd'T'HH:mm:ss.SSSXXX} %-5p [%c{1}] %m%n"/>
            <Policies>
                <SizeBasedTriggeringPolicy size="50MB"/>
            </Policies>
            <DefaultRolloverStrategy max="10" fileIndex="min"/>
        </RollingFile>

        <!-- ##################################################### -->
        <!-- Rotate audit logs daily -->
        <RollingFile name="AUDITLOG" fileName="/var/log/graylog-server/audit.log" filePattern="/var/log/graylog-server/audit-%d{yyyy-MM-dd}.log.gz">
            <PatternLayout>
                <Pattern>%d - %m - %X%n</Pattern>
            </PatternLayout>
            <Policies>
                <TimeBasedTriggeringPolicy />
            </Policies>
        </RollingFile>
        <!-- ##################################################### -->
    </Appenders>
    <Loggers>
        <Logger name="org.graylog2" level="info"/>

        <!-- ##################################################### -->
        <!-- Graylog Audit Log.  The logger name has to match the "auditlog_log4j_logger_name" setting in the Graylog configuration file -->
        <Logger name="graylog-auditlog" level="info" additivity="false">
            <AppenderRef ref="AUDITLOG"/>
        </Logger>
        <!-- ##################################################### -->

        <Root level="warn">
            <AppenderRef ref="rolling-file"/>
        </Root>
    </Loggers>
</Configuration>

The config snippets between the <!-- ######### --> tags have been added to the existing log4j2.xml file.

Make sure that the name in the <Logger /> tag matches the configured auditlog_log4j_logger_name in your Graylog server configuration. Otherwise you will not see any log entries in the log file.

Caveats

You have to make sure that the log4j2 related settings in the Graylog server config file and the log4j2.xml file are the same on every node in your cluster!

Since every Graylog server writes its own audit log entries when the Graylog Enterprise plugin is installed, the log files configured in the log4j2.xml file are written on every node. But only the entries from the local node will show up in that file.

If you have more than one node, you have to search in all configured files on all nodes to get a complete view of the audit trail.