Deprecation Note

We published the last version of Graylog Documentation before the release of Graylog 4.2. Now, all documentation and help content for Graylog products are available at https://docs.graylog.org/.

There will be no further updates to these pages as of October 2021.

Do you have questions about our documentation? You may place comments or start discussions about documentation here: https://community.graylog.org/c/documentation-campfire/30

Ubuntu installation¶

This guide describes the fastest way to install Graylog on Ubuntu 18.04 LTS. All links and packages are present at the time of writing but might need to be updated later on.

Warning

This guide does not cover security settings! The server administrator must make sure the graylog server is not publicly exposed, and is following security best practices.

Prerequisites¶

Taking a minimal server setup as base will need this additional packages:

$ sudo apt-get update && sudo apt-get upgrade
$ sudo apt-get install apt-transport-https openjdk-8-jre-headless uuid-runtime pwgen

If you get an error stating Unable to locate package, you likely need to enable the universe repository which can be done typing the below command, and subsequent commands as follows:

$ sudo add-apt-repository universe
$ sudo apt-get update && sudo apt-get upgrade
$ sudo apt-get install apt-transport-https openjdk-8-jre-headless uuid-runtime pwgen

MongoDB¶

The official MongoDB repository provides the most up-to-date version and is the recommended way of installing MongoDB 1:

$ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 9DA31620334BD75D9DCB49F368818C72E52529D4
$ echo "deb [ arch=amd64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.0.list
$ sudo apt-get update
$ sudo apt-get install -y mongodb-org

1: For e.g. corporate proxies and other non-free environments you can use a keyserver approach via wget. wget -qO- 'http://keyserver.ubuntu.com/pks/lookup?op=get&search=0x9DA31620334BD75D9DCB49F368818C72E52529D4' | sudo apt-key add -

The last step is to enable MongoDB during the operating system’s startup and verify it is running.

$ sudo systemctl daemon-reload
$ sudo systemctl enable mongod.service
$ sudo systemctl restart mongod.service
$ sudo systemctl --type=service --state=active | grep mongod

Elasticsearch¶

Graylog can be used with Elasticsearch 6.x, please follow the below instructions to install the open source version of Elasticsearch.

$ wget -q https://artifacts.elastic.co/GPG-KEY-elasticsearch -O myKey
$ sudo apt-key add myKey
$ echo "deb https://artifacts.elastic.co/packages/oss-6.x/apt stable main" | sudo tee -a /etc/apt/sources.list.d/elastic-6.x.list
$ sudo apt-get update && sudo apt-get install elasticsearch-oss

The above instructions are a derivative from the Elasticsearch install page

Modify the Elasticsearch configuration file (/etc/elasticsearch/elasticsearch.yml) and set the cluster name to graylog and uncomment action.auto_create_index: false to enable the action:

$ sudo vim /etc/elasticsearch/elasticsearch.yml

cluster.name: graylog
action.auto_create_index: false

After you have modified the configuration, you can start Elasticsearch and verify it is running.

$ sudo systemctl daemon-reload
$ sudo systemctl enable elasticsearch.service
$ sudo systemctl restart elasticsearch.service
$ sudo systemctl --type=service --state=active | grep elasticsearch

Graylog¶

Now install the Graylog repository configuration and Graylog itself with the following commands:

$ wget https://packages.graylog2.org/repo/packages/graylog-3.2-repository_latest.deb
$ sudo dpkg -i graylog-3.2-repository_latest.deb
$ sudo apt-get update && sudo apt-get install graylog-server graylog-enterprise-plugins graylog-integrations-plugins graylog-enterprise-integrations-plugins

Hint

If you do not want the Integrations Plugins or the Enterprise Plugins installed, then simply run sudo apt-get install graylog-server

Edit the Configuration File¶

Read the instructions within the configurations file and edit as needed, located at /etc/graylog/server/server.conf. Additionally add password_secret and root_password_sha2 as these are mandatory and Graylog will not start without them.

To create your root_password_sha2 run the following command:

$ echo -n "Enter Password: " && head -1 </dev/stdin | tr -d '\n' | sha256sum | cut -d" " -f1

To be able to connect to Graylog you should set http_bind_address to the public host name or a public IP address of the machine you can connect to. More information about these settings can be found in Configuring the web interface.

Note

If you’re operating a single-node setup and would like to use HTTPS for the Graylog web interface and the Graylog REST API, it’s possible to use NGINX or Apache as a reverse proxy.

The last step is to enable Graylog during the operating system’s startup and verify it is running.

$ sudo systemctl daemon-reload
$ sudo systemctl enable graylog-server.service
$ sudo systemctl start graylog-server.service
$ sudo systemctl --type=service --state=active | grep graylog

The next step is to ingest messages into your Graylog and extract the messages with extractors or use the Pipelines to work with the messages.

Multiple Server Setup¶

If you plan to have multiple server taking care of different roles in your cluster like we have in this big production setup you need to modify only a few settings. This is covered in our Multi-node Setup guide. The default file location guide will give you the file you need to modify in your setup.